Nottingham, UK, 07 March 2012 Dutch surveying company Geomaat is capturing millimetre accurate measurements in record times to support a range of highway design, construction and maintenance projects. Using the mobile laser mapping system StreetMapper, and specially developed point cloud software, Geomaat can calculate highly accurate cutting, milling and asphalt figures, create as built models and undertake change detection.
In the past these types of measurement were undertaken using total stations which was time consuming, and therefore costly, and had a big impact on other road users, commented Jolle Jelle de Vries, Managing Director of Geomaat. For example a 10km stretch of highway would have taken at least 20 nights to survey, each night requiring extensive traffic management or road closures. The resulting measurements would then have taken about a week to process. Using StreetMapper we can deliver a new design, from start to finish, in less than a week!
This is a huge advantage in itself we estimate savings for our clients of up to 50 per cent, he continued. However the benefits do not end there. Using StreetMapper we measure everything, in 3D, within a 300 metre corridor of the survey vehicle. Unlike traditional surveying techniques, this means we never have to revisit the site we can just extract extra points if and when needed.
Geomaat are unique in their highway surveying capabilities combining mobile mapping techniques with specialist highways design, construction and maintenance expertise. Recent projects undertaken by Geomaat that have benefited from the use of the StreetMapper mobile mapping system include a project to upgrade the A50 between Ewijk and Valburg on behalf of the Rijkswaterstaat, an executive of the Ministry of Infrastructure and Environment, a project to upgrade the runway at Johan Adolf Pengel International Airport and surveying over 500 kilometres of highway in support of LEM Contracts (Lifetime Maintenance). Using StreetMapper, Geomaat is also hoping to work with Municipalities to support the introduction in 2012 of a new BGT (Basic Registration History and Topography) law.
StreetMapper has been specifically designed for the rapid 3D mapping of highways, runways, railways, infrastructure and buildings. Using vehicle-mounted lasers offering a 360-degree field of view, StreetMapper enables high precision mapping to a range of 300 metres, a capacity of 550,000 measurements per second per sensor and recorded accuracies in independent real world projects of better than 10 millimetres.
Geomaat is an independent surveying specialist based in the Netherlands. Employing experienced, professional surveyors across the northern provinces Geomaat can provide surveying solutions tailored to the most challenging environments. From site specific GPS surveys to topographical measurements Geomaat has completed projects involved with transport, utilities, government and construction.
For further information see www.geomaat.com
StreetMapper has been developed by UK based 3D Laser Mapping in conjunction with German based guidance and navigation specialist IGI mbH. The system employs the latest laser scanning technology for improved field performance and accuracy, precision navigation including a solution for reduced GPS coverage in urban areas, combined with a flexible, modular configuration and increased ease of use and deployment.
For further information see www.streetmapper.com
3D Laser Mapping is a global developer of laser scanning solutions for sectors such as mapping, mining and manufacturing. 3D Laser Mapping specialises in integrating laser scanning hardware with their own software and peripherals to create solutions at the cutting edge of technology. Through a worldwide network of distributors 3D Laser Mapping is able to provide frontline support and service for a growing international client base. 3D Laser Mapping is also the Riegl Premier Distributor for the UK, Ireland and sub-Saharan Africa and the leading distributor of TerraScan software.
For further information see www.3dlasermapping.com
IGI mbH was founded in 1978. The primary goal of the company was to manage airborne sensor systems for flight guidance, sensor control using GNSS (Global Navigation Satellite System) and INS (Inertial Navigation Systems). Today the portfolio includes additional sensor systems using LiDAR, digital camera systems and thermal camera systems.
IGI covers a wide variety of expertise in optics, electronics, mechanics, software development, and analytics through a team of highly qualified scientists, engineers and technicians. With over 30 years of experience, IGI offers not only integration of various sensors but also complete sensor systems for airborne and terrestrial survey missions.
For further information see www.igi-systems.com