Nottingham, UK, 10 June 2014 – International consulting group COWI has added the worlds first truly mobile, hand held, rapid laser mapping system to its surveying equipment portfolio. COWI purchased the ZEB1 system, from 3D Laser Mapping, as it is easy to use, provides competitive advantages and is well supported. With more than 6,000 employees worldwide COWI is a Danish company involved in more than 17,000 projects at any given point in time. ZEB1 will be deployed both on shore and off shore for a wide range of infrastructure projects and building consultancy services.
Where time is a limiting factor and speed of data capture is important ZEB1 is a powerful solution, commented Morten Thoft, Surveyor and Senior Specialist in the Survey Department of COWI. We see excellent opportunities for the ZEB1 providing building maps and floor plans for applications such as space management and due diligence. ZEB1 will also be useful when larger, more cumbersome devices are simply not practical such as in tunnels and other hard to reach areas.
COWI A/S is an international consulting group, specialising in engineering, environmental science and economics, with headquarters based in Lyngby, Denmark. COWIs Survey and Mapping Department provides a range of services including aerial mapping, airborne LiDAR and terrestrial laser scanning with specialists in Geographical Information System (GIS), Land Administration and Land Surveying. Having used traditional terrestrial laser scanners for more than ten years COWI has considerable experience in selecting and implementing best fit surveying solutions for a wide variety of projects around the globe.
ZEB1 is very easy to operate and collecting 3D data at normal walking speeds gives us the ability to cover large areas in short periods of time, continued Thoft. Working with 3D Laser Mapping has also been a very positive experience. The service levels we have received have been very high, which is important to us, as when questions and challenges occur we need support and to share experience and know how.
Developed by CSIRO and commercialised by UK based 3D Laser Mapping, ZEB1 uses robotic technology called Simultaneous Localisation and Mapping (SLAM). The ZEB1 system includes a lightweight laser scanner mounted on a simple spring mechanism, which continuously scans as the operator walks through the environment. As the scanner loosely oscillates about the spring it produces a rotation that converts 2D laser measurements into 3D fields of view. Its ability to self-localise makes ZEB1 ideally suited for use indoors, underground and in other covered environments, where traditional solutions that utilise GPS dont function well.
CONTACTS:
Editorial enquiries to Robert Peel, robert@market-it.co.uk, +44 (0)1666 823306
Reader and advertising enquiries to charlie.whyman@3dlasermapping. com, +44 (0)1949 838 004
Colour separation requests to robert@market-it.co.uk
Notes to Editors:
ZEB1 was developed by CSIRO, Australias national science agency, and is licenced to GeoSLAM (a UK based start-up company). The competitively priced ZEB1, now available from 3D Laser Mapping, allows for fast data capture without any complex set up. ZEB1 is easy to use, truly portable and does not require expensive software or high end computers to process the captured data.
3D Laser Mapping is a global developer of laser scanning solutions for sectors such as mapping, mining and manufacturing. 3D Laser Mapping specialises in integrating laser scanning hardware with their own software and peripherals to create solutions at the cutting edge of technology. Through a worldwide network of distributors 3D Laser Mapping is able to provide frontline support and service for a growing international client base. For further information see www.3dlasermapping.com
CSIRO, the Commonwealth Scientific and Industrial Research Organisation, is Australia’s national science agency and one of the largest and most diverse research agencies in the world. CSIRO works with leading scientific organisations around the world, and is recognised internationally for the quality of its research. CSIRO’s research is performed by the 11 Divisions, which are the business units of CSIRO. CSIRO is one of the largest and most diverse scientific institutions in the world with more than 6500 staff located across 56 sites throughout Australia and overseas. For further information see www.csiro.au
CSIROs Digital Productivity and Services Flagship is a $48 million research initiative targeting productivity growth in Australia through frontier services innovation and by unlocking the value of a national broadband infrastructure. Through its research the flagship will help add value to the Australian economy by developing and delivering more efficient and innovative services that improve peoples wellbeing and prosperity. For further information see www.csiro.au/dpas