Nottingham, UK, 11 December 2013 – A ZEB1 mobile mapping system is proving to be an integral tool for a business start-up in New Zealand. Dunedin based Qntfi is a brand new company specialising in building replacement reports and contract scanning services. Purchased from 3D Laser Mapping the newly acquired ZEB1 is already bolstering market perception of the fledging company. The solution, described as the worlds first truly mobile, hand held rapid laser mapping system, has also been successfully deployed on a number of projects achieving higher accuracies, faster rates of data capture and more practical operating procedures than traditional surveying techniques.
We describe ourselves primarily as a measuring company as opposed to a company of surveyors, commented Managing Director and founder of Qntfi Jonathan Daley. The ZEB1 affords us the capacity to address much bigger projects than other tools in our arsenal. This capacity, in turn, breeds credibility. Qntfi is seen to be an early adopter of technology and the market perception of our business is significantly bolstered.
ZEB1 is also delivering significant operational advantages across a range of projects. The system has been used on a building surveying project where limited access made it impossible, using traditional scanning techniques, to obtain relative floor heights – A simple 35 minute walkabout provided all the detail required without any of the drama! commented Daley. The ZEB1 system has also been used within marine architecture to scan both the inside and outside of boats in dry docks. This provides for more accurate marine surveys and from the data the hull of the boat can be modelled and the flow and turbulence, and hence operating conditions, efficiencies and speed, etc., calculated all as a result of 20 minutes capture!
As a tool the ZEB1 has opened a lot of doors for use and we remain impressed with 3D Laser Mapping, continued Daley. Their customer support is exemplary even across significant time zones. We have ambitious plans for our ZEB1 including assessing and mapping vineyards with seismic damage and surveying sand dunes for comparative analysis and we know 3D Laser Mapping will support us every step of the way.
Developed by CSIRO and commercialised by UK based 3D Laser Mapping, ZEB1 uses robotic technology called Simultaneous Localisation and Mapping (SLAM). The ZEB1 system includes a lightweight laser scanner mounted on a simple spring mechanism, which continuously scans as the operator walks through the environment. As the scanner loosely oscillates about a spring it produces a rotation that converts 2D laser measurements into 3D fields of view. Its ability to self-localise makes ZEB1 ideally suited for use indoors, underground and in other covered environments where traditional solutions that utilise GPS dont function well.
Editorial enquiries to email@example.com, +44 (0)1666 823306
Reader and advertising enquiries to charlie.whyman@3dlasermapping. com, +44 (0)1949 838 004
Colour separation requests to firstname.lastname@example.org
Notes to Editors:
ZEB1 was developed by CSIRO, Australias national science agency, and is licenced from GeoSLAM (a UK based start-up company). The competitively priced ZEB1, now exclusively available from 3D Laser Mapping, allows for fast data capture without any complex set up. ZEB1 is easy to use, truly portable and does not require expensive software or high end computers to process the captured data.
3D Laser Mapping is a global developer of laser scanning solutions for sectors such as mapping, mining and manufacturing. 3D Laser Mapping specialises in integrating laser scanning hardware with their own software and peripherals to create solutions at the cutting edge of technology. Through a worldwide network of distributors 3D Laser Mapping is able to provide frontline support and service for a growing international client base. For further information see www.3dlasermapping.com
CSIRO, the Commonwealth Scientific and Industrial Research Organisation, is Australia’s national science agency and one of the largest and most diverse research agencies in the world. CSIRO works with leading scientific organisations around the world, and is recognised internationally for the quality of its research. CSIRO’s research is performed by the 11 Divisions, which are the business units of CSIRO. CSIRO is one of the largest and most diverse scientific institutions in the world with more than 6500 staff located across 56 sites throughout Australia and overseas. For further information see www.csiro.au
CSIRO Digital Productivity and Services Flagship a $40 million research initiative targeting productivity growth in Australia through frontier services innovation and by unlocking the value of a national broadband infrastructure. Through its research the flagship will help add value to the Australian economy by developing and delivering more efficient and innovative services that improve peoples wellbeing and prosperity.